Just another tech blog
Browsing Year
The Integrated Dell Remote Access Controller (iDRAC) is designed for secure local and remote server management. The iDARC monitors system health, checks and logs what is installed in the system and controls the servers cooling systems. As you may have discovered, when you cross flash a Dell H310 raid controller to IT mode and as …
TrueNAS Core In part 1 I cover some basic ZFS theory and the layout of a high performance ZFS pool for ESXi VM block storage. I will be using TrueNAS Core, which in my opinion is hands down the best free storage platform on the market and it is open source. TrueNAS Core will give …
Introduction to Fibre Channel (FC) If you are new to Fibre Channel SAN technology you should take the time to familiarise yourself with the basic terminology. Fibre Channel (FC) was developed in the late 1980s and became an American National Standards Institute (ANSI) standard in 1994 with it’s physical topology as well as logical topology …
In this blog we will learn how to change the Round Robin Path Selection Policy (VMW_PSP_RR) on FC and iSCSI LUNs in a VMware environment to better balance the I/O load across all active storage paths and make the setting persistent. Modifying the IOPS limitation to 1 will improve performance where an active storage path …
I’ve been running Plex in a CentOS 7 VM for over 5 years and it’s been extremely stable, I’ve had no issues, not even one. Currently Plex is hosted on VMware ESXi 7.0.2 host with two 4 vCPUs and 6GB of vRAM and it works well with H264. I’ve decided to re-rip all of my …
The Scope I’m going to setup Fibre Channel storage network to connect ESXi 7 hosts to a TrueNAS Core storage server using a Cisco MDS series switch. I’ve chosen to use Fibre Channel for my VM datastores because of it’s great performance and reliability and the fact that it works so well with VMware ESXi. Fibre …
I’ve been looking for a way to control a standard AC ceiling fan for some time. I use Z-Wave products for my lighting control and unfortunately there are no Z-Wave fan controllers that I know of. The main prerequisite is that the fan speed can be controlled from a wall plate independent of Home Assistant …